PLANT CONFIGURATIONS - ProCone GmbH

Go to content

PLANT CONFIGURATIONS


Deutsch         English

ProCone offers the BASURAgas® Universal System in different configurations. See below some of the configurations possible. A combination of feedstock materials is also possible. Also the product produced can be different from one production line to the other in the same plant. Please contact ProCone if you do not see your feedstock material or for any other configuration question.

Wood Conversion

All wood like waste wood category AII and AIV, scrap wood, wood from rapidly renewable trees, railway ties, telephone poles, construction wood and many more can be converted with the BASURAgas® Universal System. The materials preparation at the front end of the gasifier involves typically a shredder and a dryer, if the wood moisture content is too high for a direct process in the gasifier. The heat for the dryer is gained from the excess heat of the gasifier, gas cleaning unit or the electrical power generation of the plant if existing.
Industrial and Municipal Waste Conversion

All waste like industrial, commercial and municipal waste, SlF/shredded residues (RESH), tires and more can be converted with the BASURAgas® Universal System. The materials preparation at the front end of the gasifier involves typically a shredder, sorting machine for recyclables, and a dryer, if the moisture content of the remaining waste is too high for a direct process in the gasifier. The heat for the dryer is gained from the excess heat of the gasifier, gas cleaning unit or the electrical power generation of the plant if existing.
Coal Conversion

All different coal qualities like lignite, bitumen coal and more can be converted with the BASURAgas® Universal System. The materials preparation at the front end of the gasifier involves typically a crusher or grinder and dryer, if the coal moisture content is too high for direct process in the gasifier, and in some cases a briquette machine. The heat for the dryer is gained from the excess heat of the gasifier, gas cleaning unit or the electrical power generation.
Biodegradable Waste Conversion

All biodegradable waste like sewage sludge, waste from the palm oil, coco or the coffee industry, meat, bone meal or fat waste from slaughterhouses and much more can be converted with the BASURAgas® Universal System. The materials preparation at the front end of the gasifier involves typically a shredder and a dryer, if the waste moisture content is too high for direct process in the gasifier. The heat for the dryer is gained from the excess heat of the gasifier, gas cleaning unit or the electrical power generation if existing.

The solid feedstock material is fed with a continuous supply into the gasifier of the SynGas BASURAgas® Universal System.
The gasifier converts the solid feedstock material into SynGas. If wood is used as a feedstock material, approximately 3% of the initial volume remains as a slag.

The SynGas is cleaned, purified and compressed to specification to be fed to the next stage.

ProCone offers different utilizations for the SynGas. For example a larger plant configuration can consist of a combination of bio-chemical conversion lines, Fischer-Tropsch synthesis lines and a power generation unit producing high grade ethanol, Bio-Diesel, Bio-Jet-Fuel, paraffin wax, and supply the plant with power and heat. Single application can contain one of the above mentioned lines. Our materials handling and management will consult with you as to what is the best possible economic, environmental and ethically suitable plant configuration for your application.
Production Line Nr. 1
Production Line Nr. 2
Production Line Nr. 3
Production Line Nr. 4
ProCone GmbH
Nordstrasse 17
CH-4665 Oftringen AG
Tel.: +41 (0)62 216 80 80
Fax: +41 (0)62 216 80 81
Back to content